Aug 03 2010

Sunrise at Anacapa Island in the North Channel Islands

Published by under The Adventure,Wylie 39

Just a little eye candy for you.

This is the non-photoshopped sunrise that I saw passing between Santa Cruz Island and Anacapa Island in the North Channel Islands.

All I can say is Good Morning!

No responses yet

May 04 2010

The Baja Bash (and another Beautiful Cabo San Lucas Sunrise)

It has been quite a while since I have updated the blog–but, things have gotten a bit hectic.

There was a repair to the heat exchanger on the motor, the Tsunami from the earthquake in Chile, a trip into the Sea of Cortez with friends, lots and lots of client work (that has been the consuming part), and now, the preparation for the return trip home.

That list is a bit lengthy, unfortunately, but here it is:

  • Clean the filter screen in the fuel system
  • Clean debris from the bilge pump/screens and hoses. If that does not resolve the slow pumping problem, replace. I tested it the other day, and it was pumping slowly, if at all. It has power and you can hear it working. It is certainly not pumping the 500 gph rating. If the hoses are filled with gunk, it should return to normal operation once they are cleaned. If not, it must be repalced. Gotta have a bilge pump.
  • Mount the flag holder to the first spreader (a lashing–no drilling involved), and mount the radar reflector on the standing rigging. On the sail down, we attached the reflector and our courtesy flags to a halyard, but I took them down because the rolling from the waves caused this contraption to swing back and forth–and, it was resting against the spreaders–basically sawing through the halyard.
  • Change the oil in the motor. Bought the hand pump to remove the old oil in La Paz a few weeks ago. Have the new oil aboard, and purchased a new filter at a local store.
  • Sew temporary repairs to the first reef points and rig the second reef. On the way down, the winds were 45+ knots and we had to gybe. We made it through, but the reef points tore about an inch on two of the four. I’ll use the palm and waxed thread and sew those together to keep them from ripping any more and out of their insets. I’ll certainly need to reef on the bash back to San Francisco.
  • Tie down the front netting with heavier-duty line. The netting on the bow was fixed with plastic rings, and they simply cannot endure rough conditions. I purchased some nylon line and am sewing it to the railing for a more permanent fix.
  • Clean the bottom thoroughly, and replace zincs. I finished this yesterday (with the exception of the zincs)–and, it took about 1.5 hours. The last guy I paid was a friend of a friend, and he kinda took me for a ride. “Oh, yeah, it’s CLEAN.” Perhaps we simply have different definitions of “clean.” Regardless, it is super-clean now.
  • Mop the deck with fresh water. The sand blows all the time–it is a desert down here. Time to mop the deck and get all that dirt off.
  • Purchase 2 jerry cans for water. One of the two 25 gallon water tanks sprung a leak. The best idea would be to pull it and have it repaired, but that process may be cost-prohibitive. As an alternative, 2 more jerry cans of fresh water would suppliment the two that I already have and give me 24 gallons–one gallon less than the tank, and would cost hundreds less.
  • Buy the provisions. Already made the menu and shopping list.
  • Fuel up, and top off the water tanks.
  • Wait for a good weather window.

I’ll keep you posted as to the progress. For now, please enjoy this morning’s sunrise.

No responses yet